Car Hood RGB Lights

Your Hood, Alive.

This isn't a basic DRL strip. The Hood RGB Kit opens with a full scan animation every time you start your car, flows through streamer colour modes while you drive, and automatically syncs your turn signals without any extra wiring tricks. Ultra-thin silicone construction sits flush against your hood line for a factory-fit look with anything but factory lighting.

Key features

• Scan-on startup mode plays a full light sweep animation every time the engine starts
• Illusion streamer mode runs continuously while driving for a dynamic, flowing light effect
• Automatic turn signal sync detects your vehicle's original steering frequency and matches it precisely, no calibration needed
• Full RGB colour and flow mode customisation via app, change colours, speed, and patterns on the go
• App control range of 10 to 15 metres, no need to be inside the vehicle to adjust
• Ultra-thin silicone hose construction with bright embedded LEDs sits flush and clean on any hood profile
• IP66 waterproof rated, built for all weather conditions including heavy rain
• 10W per metre power draw at 11 to 15V, compatible with all standard 12V vehicle systems
• Remote control included for quick mode switching without the app

How it works

The Hood RGB Kit uses four wires, each with a specific function. Installation is straightforward, quick and easy.

Red wire (ACC power) connects to your ACC fuse inside the fuse box. ACC power is the supply that activates when you start the vehicle and cuts when you shut down, which is what triggers the scan animation on startup.

Black wire (ground) connects to any chassis ground point or the negative terminal.

Yellow wire (left turn) connects to the positive wire on your left indicator circuit.

Blue wire (right turn) connects to the positive wire on your right indicator circuit.

The turn signal wires are what enable the streamer sync feature. Once connected, the strip automatically reads your indicator frequency and mirrors it in real time, no app setup required for this function.

Running the strip at night as a headlight accent: connect the red wire to the positive wire on your headlight assembly harness instead of the ACC fuse. This powers the strip whenever your headlights are on rather than on engine start.

Once wired, download the companion app, connect via Bluetooth within 10 to 15 metres, and choose your colour, mode, and flow speed. The remote handles quick on, off, and mode cycling without your phone.

Specifications

In the box

• Hood RGB LED strip
• Wireless remote control
• 4-wire harness (red, black, yellow, blue)
• Instruction guide